createlosa.blogg.se - Tv 12v analog to digital converter box

Connect the Yellow(+) power wire to the vehicle 12Volt Battery (+).

There should only be power to this wire when the vehicle ignition is in the ACC position.

Connect the Red(+) power wire to the vehicle ACC power.

Working with the connection harness: In autos Run the cable from the desired location to the 12V converter box.

The IR sensor should be visible from the areas that you will be using your remote control. Find a suitable location for the included IR sensor that is within reach of it’s 9′(foot) cable.Make sure to leave enough cable at each end of the run to work with. Run a set of A/V cables from the TV to the converter box.You may use coaxial connectors and additional cable to lengthen the included TV antennas cable up to 100′ (feet). You may also choose to use the included TV antenna. Choose a location to install the 12Volt Converter Box and run a coaxial cable from your existing TV antenna to the converter box.The audio/video cables from the 12V converter are Female. Your TV must have audio/video inputs, this is how the 12v converter box will connect. It’s much cheaper and easier to run a long coaxial cable from the antenna to the box than it is to run a long A/V cable from the box to the TV.Ĭonnecting the DTV2 converter/tuner box to your 12-volt system is pretty easily done. The closer the converter box is to your TV the less cost you’ll have in A/V cables. In most cases you’ll find it’s best to install the 12V converter box within a short distance from your TV (if you’re only running one TV).

This means that it can be installed in a cabinet, closet, under dash, under seat etc. The DTV2 12 Volt Converter Box for autos and “off grid” living installs out of sight.